CS bronze cap trapezoidal nut - HIWIN - ADAJUSA
CS bronze cap trapezoidal nut - HIWIN - ADAJUSA

Tuerca trapezoidal casquillo de bronce 20x4

€22.61 Tax included

€18.69 tax excl.

The trapezoidal nuts in bronze bushing are manufactured with special tools according to DIN 103, tolerance class H7.

Diameter: 20x4

Reference: CS4D

Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

No queries yet, leave the first!
Privacy
Shipments
Returns
 
The trapezoidal nuts manufactured in bronze bushing are suitable to be used as a safety nut for movement transmissions in continuous operation.

They can be used in combination with corrosion resistant stainless steel spindles.

Reference: CS4D

Measures:
  • Inner diameter: 20
  • Step 4
  • Outer diameter (E): 30
  • Length (C): 30
For other sizes consult

Material for professional use, install in compliance with the regulations in force at the place of installation.

For more information, you can download the technical sheet by clicking on the "Annexes" tab.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

5 other products in the same category:

20x4 rolled trapezoidal spindle - HIWIN - ADAJUSA
Special material, cut to size , delivery time approximately 5-7 days
Bronze spindles and nuts

Laminated trapezoidal spindle 20x4 C45 steel

Generico
RTS2004L
Starting from €26.49 (€21.89 tax excl.)
Laminated spindle diameter 20mm, pitch 4mm. Made of C45 steel Diameter: 20mm Pitch: 4mm Reference: RTS2004L Cutting the spindle to the desired size from 500 mm to 1,800 mm. Please indicate the length you want. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.
View
20x4 rolled trapezoidal spindle - HIWIN - ADAJUSA
Special material, cut to size , delivery time approximately 5-7 days
Bronze spindles and nuts

Laminated trapezoidal spindle 30x6 C45 steel

Generico
RTS3006L
Starting from €53.88 (€44.53 tax excl.)
Laminated spindle diameter 30mm, pitch 6mm. Made of C45 steel Diameter: 30mm Pitch: 6mm Reference: RTS3006L Cutting the spindle to the desired size from 500 mm to 1,800 mm. Please indicate the length you want. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.
View

Customers who bought this product also bought:

Full 4-pole disconnector switch 25a 67x67mm SE series - Giovenzana
  • Pack
Disconnector switches 4-poles

Disconnector switch 4 poles 25a series SE 67x67 yellow red lever - Giovenzana

GISE160467R
€23.79 (€19.66 tax excl.)
Disconnecting switch 4 poles (tetrapolar) 25a. ,rotary control 90º 0-1. front the yellow color and handle in red, made according to the strictest European standards, which allow, meet the requirements in terms of safety.Suitable for interruption, connection and switching of electrical circuits as well as direct start of motors and main switch in machines....
Three-phase gear motor 0.37kW 0.5HP 230/400Vac 1500 rpm ratio 100 T63 (14rpm) Three-phase gear motor 0.37kW 0.5HP 230/400Vac 1500 rpm ratio 100 T63 (14rpm) 2
  • Pack
Three-phase geared motors

Three-phase Gear motor 0.37kW 0.5CV 230/400Vac 1500 rpm ratio 100 T63 (14rpm)

9MR0630037014
€223.35 (€184.59 tax excl.)
Three-phase Gear motor 0.37kw 0.5Cv 230/400Vac, reducer size 63 with reduction ratio I:100 that allows output turns of approximately 14 rpm . Motor: three-phase 0.37Kw 230/400Vac 1500rpm Reducer : size 63 I:100. Output laps: 14 For output shaft: Ø25mm Representative image for illustrative purposes, the item supplied will correspond to the indicated...
Guide rail size 30 HIWIN - ADAJUSA
Special material, cut to size , delivery time approximately 3-5 days
Linear and guideways

Guide rail size 30 series HG precision C- Hiwin

HGR30RC
Starting from €120.52 (€99.60 tax excl.)
Rail (guide) for recirculating ball skates size 30, precision C. Reference: HGR30RC Cut the guide to the desired size between 300 mm and 1,800 mm. Indicate the length you want in the side menu. Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.
View
Home
Product added to wishlist
Product added to compare.