EMI filter single-phase 10A | Adajusa
EMI filter single-phase 10A | Adajusa

EMC Filter 10A 230V FN2010 Series

€24.44 Tax included

€20.20 tax excl.

Single stage general purpose AC/DC EMC filter, 10A current rating, 1-phase mains supply, standard dimming .

Solution for compliance with electromagnetic compatibility ( EMC ) in electrical and electronic equipment. They allow to improve the immunity, efficiency and security of the equipment controlling the interferences limited by the EMC legislation. With the use of the appropriate filter, it is achieved that the disturbance levels are reduced below the maximum allowed values.




Reference: FN2010-10-06

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
 

Solution for electromagnetic compatibility ( EMC ) compliance. Single stage general purpose AC/DC RFI filter, 10A current rating, single phase mains supply, standard dimming.

Single-phase filters for electrical and electronic equipment that help meet international standards. They allow to improve the immunity, efficiency and safety of the equipment. With the use of the appropriate filter, it is achieved that the disturbance levels are reduced below the maximum values allowed according to the regulations.

Quick and easy chassis mounting. Intended for a wide variety of uses offering a good size/amp ratio.


Typical Applications:

  • Electrical and electronic equipment
  • domestic equipment
  • office equipment
  • Data communication equipment




Features:

  • Manufacturer/Supplier: Schaffner
  • Reference: FN2010-10-06
  • Rated voltage (*) : 250Vac 50/60 Hz / 250Vdc
  • Operating Frequency: DC to 400Hz
  • Rated current: 10A at 40°C (11.5A at 25°C)
  • Leakage current: 0.66mA (250Vac, 50Hz) / 0.38mA (120Vac, 60Hz)
  • Power loss: 2.5W (25°C/DC)
  • Inductance (**) : 0.8mH
  • Capacitance (**) : Cx 0.1µF / Cy 4.7nF
  • Resistance (**) : 1000kΩ
  • Dimming Type: Standard
  • Number of stages: 1
  • Operating temperature: -25°C to +100°C
  • Connection: 6.3x0.8mm Faston Terminals
  • Certified: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 (applies to AC and DC applications)
  • Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
  • Overvoltage category: II conforming to IEC 60664-1
  • Pollution degree: 2 conforming to IEC 60664-1
  • Reliability: MTBF 1,250,000h at 40ºC/230V
  • Weight: 85g

(*) maximum RMS operating voltage at rated frequency or maximum DC operating voltage
(**) Tolerances applied: Inductance: -30/+50%, Capacitance: ±20%, Resistance: ±10%




Electric scheme:





Filter attenuation:






According to CISPR 17; CM=50 Ω/50 Ω yes; DM=50 Ω/50 Ω asymmetrical




Dimensions:





A: 64mm; B: 35mm; C: 29.3mm; D: 43.5mm; E: 32.5mm; F: 54mm; G: 21mm; H: 9.3mm; I: 15.3mm; J: 21.8mm; K: 5.3mm; L: 6.3mm;
M: 0.7mm





Material for professional use, it must be installed in compliance with current regulations in the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

3 other products in the same category:

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.