The ECO-VE-COMBI control and protection panels are designed to protect electric vehicle charging stations according to the ITC-BT-52 directive.
The protection panel is equipped with protection against both permanent and transient surges in the electrical network.
Transient rise protection protects against electrical discharges filtered through the grid due to a thunderstorm and lightning strikes or manoeuvre of transformers that supply the grid. This protection derives this discharge to the ground connection preventing it from reaching the charging station. If the protection is activated, red indicators will be displayed on the device in addition to preventing reconnection. If so, it will be necessary to change the transient protection cartridge by firmly pulling it and replacing it with a new one. The permanent protection protects against voltage rises in the network greater than 275 V according to the EN 50550 standard, limiting the operation of the equipment and preventing a voltage higher than it from reaching the charging station.
General characteristics:
- Manufacturer: Toscano
- Reference: ECO-VE-COMBI-4P16T15
- Amperage: 4x16A
- Power: 11.08kW
- Rated voltage: 230Vac (L/N) / 400VAC (L/L) 50/60Hz
- Consumption of Vigivolt protections: 0.3VA
- Maximum terminal section: 25mm²
- Environmental margins: -5ºC to +40ºC / 80º HR
- Degree of protection: IP65
- Dimensions (mm): 362x362x160
- Lock: Lock with metal key
Permanent Features:
- Trigger voltage: >270Vac
- Surge response time: according to EN 50550
IGA Features
- Rated current: 16A
- Shooting curve: C
- breaking capacity: 10kA
Differential Characteristics:
- Class A: Alternating and pulsed current
- Leakage current: 30mA
Transient Features:
- Maximum voltage Uc: 320VAC (L/N)
- Protection level Up (L/N) (N/PE): <1.5kV
- Maximum discharge current (8/20μs) Imax (L/N) (N/PE): 15kA
- Class: II
Standards:
IEC 61643-11 / EN 61643-11/ IEC 61439-123 / ITC-BT-52 / EN 50539-11:2013/A1:2014 / EN 60269-6:2011 / IEC 60364-7-712:2017 RLV / EN 60947 3:2009/A2:2015 / EN 61439-1:2012/ EN 61439-2:2012 / A11:2018
Connexion:
To expand the information you can download the technical sheet by clicking on the "Attachments" tab.
Material for professional use, install in compliance with the regulations in force at the place of installation.