Cap adapter for motor shaft or reducer from...
Cap adapter for motor shaft or reducer from 14mm to 19mm

Cap adapter for motor shaft or reducer from 14mm to 19mm

€9.80 Tax included

€8.17 tax excl.

Cap 14/19 adapter for motor or gearbox shaft, inner diameter 14mm and outer diameter 19mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.


Reference: 14/19


Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
Privacy
Shipments
Returns
 
Cap adapter with inner diameter 14mm and outer diameter 19mm. Allows to adapt the output shaft of a motor to the input shaft of a gearbox or any other type of application.

Made of ground steel.
The supply includes the key for the bushing.



Technical data
  • Part number: 14/19
  • Material: Steel
  • Finish: ground
  • Inside diameter: 14mm
  • Outside diameter: 19mm
  • Key: included



Material for professional use, must be installed in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motor size 200-225 rail length 686 mm

Generico-MOT
LMGT686/16
€269.18 (€224.32 tax excl.)
Tensioning rails for electric motors with housing sizes 200 and 225. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 495mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Part number: LMGT686/16Representative image for...
Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motor size 80-90 rail length 312 mm

Generico-MOT
LMGT312/8
€61.62 (€51.35 tax excl.)
Tensioning rails for electric motors with housing sizes 80 and 90. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 312mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks . Reference: LMGT312/8Representative image for illustrative...
Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motor size 80-90 rail length 395mm

Generico-MOT
LMGT395/8
€92.87 (€77.39 tax excl.)
Tensioning rails for electric motors with housing sizes 80 and 90. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 395mm.Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT395/8Representative image for illustrative...
Tensioning base for... Tensioning base for... 2
Bases tensoras para motores eléctricos

Tensioning base for electric motor size 132

Generico-MOT
LMBTSMA380
€45.49 (€37.91 tax excl.)
Tensioning base for electric motors with housing size 132. Allows adjustment and regulation of belt tensioning and alignment without disassembling the motor. Adjustable plate displacement by means of standard screw. Part No.: LMBTSMA380Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.
Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motor size 132 rail length 630 mm

Generico-MOT
LMGT630/10
€179.12 (€149.27 tax excl.)
Tensioning rails for electric motors with housing size 132. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 630mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT630/10Representative image for illustrative...
Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motor size 80-90 rail length 495mm

Generico-MOT
LMGT495/8
€99.52 (€82.93 tax excl.)
Tensioning rails for electric motors with housing sizes 80 and 90. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 495mm.Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT495/8Representative image for illustrative...
Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motor size 63-71 rail length 312 mm

Generico-MOT
LMGT312/6
€61.62 (€51.35 tax excl.)
Tensioning rails for electric motors with housing sizes 63 and 71. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 312mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks . Part number: LMGT312/6Representative image for...

Customers who bought this product also bought:

Gear motor single-phase 0.37kW 0.5HP 230Vac 1500 rpm ratio 25 T40 (56rpm) Gear motor single-phase 0.37kW 0.5HP 230Vac 1500 rpm ratio 25 T40 (56rpm) 2
  • Pack
Single-phase geared motors

Single-phase Gear motor 0.12kW 0.16HP 230Vac 1500 rpm ratio 25 T30 (56rpm)

9MR030012254M
€143.64 (€119.70 tax excl.)
Single-phase Gear motor 0.12kw 0.16HP 230Vac, reducer size 30 with reduction ratio I:25 that allows output turns of approximately 56rpm. Motor: Single-phase 0.12Kw 230Vac 1500rpm Reducer : size 30 I:25 Output laps: 56 For output shaft: 14mm Representative image for illustrative purposes, the item supplied will correspond to the indicated...
Three-phase motor 0.55Kw 0.75HP 230/400V 1500 rpm IE1 Flange B5 reduced housing Three-phase motor 0.55Kw 0.75HP 230/400V 1500 rpm IE1 Flange B5 reduced housing 2
Three-phase electric motors 1500 rpm flange B5 aluminum housing IE1, IE2, IE3

Three-phase motor 0.55Kw 0.75HP 230/400V 1500 rpm IE1 Flange B5 reduced casing

SS7134B54E1
€111.31 (€92.76 tax excl.)
Three-phase electric motor 0.55kW (0.75HP) asynchronous 230/400V 1500 rpm Flange B5. Reduced aluminum housing. Manufactured under European IEC regulations. Reference: SS-713-4 B5 CR Voltage: 230/400Vac 50/60Hz. Number of poles: 4. Revolutions: 1500 rpm . Flange: B5. Shaft diameter: 14mm. flange diameter: 160mm Power: 0.55Kw - 0.75HP. Size: 71....
Three-phase motor 0.37Kw 0.5HP 230/400V 3000 rpm IE1 Flange B14 reduced housing
Three-phase electric motors 3000 rpm flange B14 aluminum housing IE, IE2, IE3

Three-phase motor 0.37Kw 0.5HP 230/400V 3000 rpm IE1 Flange B14 reduced casing

SS6332144E1
€84.12 (€70.10 tax excl.)
Three-phase electric motor 0.37kW (0.5HP) 230/400Vac., 3000 rpm (2 Poles), B14 flange, reduced aluminum housing. Manufactured under European IEC regulations. Reference: SS-633-2 B14 CR Voltage: 230/400Vac 50/60Hz. Number of poles: 2. Revolutions: 3000 rpm . Flange: B14. Shaft diameter: 11mm. flange diameter: 90mm. Power: 0.37Kw - 0.5hp. Size:...
Home
Product added to wishlist
Product added to compare.