0.4Kw EL Series Single Phase Frequency Converter - DELTA
0.4Kw EL Series Single Phase Frequency Converter - DELTA

Frequency converter single-phase 0.75kW vector EL-W series - DELTA

€183.01 Tax included

€151.25 tax excl.

Frequency inverter single-phase 230V 0,75kW (1CV) vectorial, with fixed programming panel (not removable)

The single-phase frequency inverters allow the control and speed variation of standard three-phase motors from a single-phase supply network.

Manufacturer DELTA

Part number: VFD007EL21W

Logotipo Delta

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
 

Frequency converter single-phase 230V 0.75kW (1CV), three-phase 230V output, vector control, with integrated, non-removable programming panel. This model of frequency converter does not incorporate RFI filter.

Single-phase frequency converters (frequency inverters) allow the control and speed variation of standard three-phase motors from a single-phase supply network. They are only suitable for connection to AC motors.
On its front panel, it incorporates all the necessary controls for motor control and a potentiometer for speed regulation. This inverter model can be controlled from potentiometer and external push buttons


The EL-W series of frequency converters of the brand DELTA incorporates:

  • Potentiometer
  • Programming panel integrated in the front panel (not removable)
  • 8 programmable speeds with input activation
  • PID control
  • RS485 communication
  • Braking module not included
  • RFI filter not included
  • No analog output
  • Does not support mounting of optional communication boards







Technical features:

  • Manufacturer DELTA
  • Part number: VFD007EL21W
  • Maximum motor power: 0.75kW (1CV)
  • Rated Voltage/Frequency: Single phase 200 - 240Vac 50/60Hz
  • Voltage tolerance: ± 10% (180 - 264Vac)
  • Frequency Tolerance: ± 5% (47 - 63Hz)
  • Rated input current: 9.3A
  • Maximum output voltage: Three-phase proportional to input voltage
  • Rated output current: 4.2A
  • Rated output frequency: 0.1 - 400Hz



Control and operating characteristics:

  • Control system: SPWM (Sinusoidal Pulse Width Modulation), V/F or open-loop vector control
  • Torque characteristics: Including automatic slip torque compensation, starting torque can be 150% at 5Hz
  • Overload capability: 150% of rated current for 1 minute
  • Jumping frequency: 3 zones, setting range 0.1 - 400Hz
  • Acceleration/deceleration time: 0.1 to 600 seconds (2 independent settings for acceleration/deceleration time)
  • Stall prevention level: 20 to 250 % of rated current setting
  • DC injection braking: Starting frequency 0.1 to 400Hz. Output 0 to 100% of rated current. Duration: 0 to 60 seconds
  • V/F model: Adjustable V/F model
  • Frequency adjustment: By keys, potentiometer or external signals
  • Start/stop signal setting: via keys or external signals
  • Multifunction input signal
  • Multifunction output indicator
  • No analog output available
  • Protection functions: Over voltage, over current, under voltage, faults, overload, overheating, electronic thermal relays, PTC overheating protection
  • Cooling: Natural ventilation
  • Operating temperature: -10ºC to 40ºC (requires fan accessories to reach 50ºC)
  • Storage temperature: -20ºC to 60ºC (-4ºF to 140ºF to 140ºF)
  • Humidity: Below 90% RH (non-condensing)
  • Programming and control panel: Integrated
  • Degree of protection: IP20
  • Weight: 1kg
  • Dimensions: Height 162mm x Width 92mm x Depth 128mm
  • Certifications: CE, ROHS, GB 12668.3


Dimensions:





NOTE
: A magnetothermic must be installed at the input of the for power line protection (refer to the instruction manual for the appropriate magnetothermic size for each drive model). Slow fuses can also be installed.




For further information, you can download the data sheet by clicking on the "Attachments" tab.

This equipment is for professional use and must be installed by qualified personnel in compliance with the regulations in force at the place of installation

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

16 other products in the same category:

Customers who bought this product also bought: