Electrovalve 1/4 5/3 closed centers bistable - Metal Work - ADAJUSA
Electrovalve 1/4 5/3 closed centers bistable - Metal Work - ADAJUSA
Electrovalve 1/4 5/3 closed centers bistable - Metal Work - ADAJUSA
Electrovalve 1/4 5/3 closed centers bistable - Metal Work - ADAJUSA

Solenoid valve 1/4 5/3 closed centers without coils - Metal Work

€108.43 Tax included

€89.61 tax excl.

1/4" 5/3 way monostable, closed (NC) pneumatic solenoid valve for industrial and general use applications. Supports coils of size 22mm with core of Ø8mm.

Reference: 7020022100


Logo-Metal-Work


Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
Privacy
Shipments
Returns
 

Pneumatic solenoid valve of 1/4 5 ways, 3 positions, closed centers, monostable. For general and industrial applications. The solenoid valve is normally closed (NC), that is, without tension in the coil, the inlet is not communicated with the outlet, that is, there is no air pressure at the outlet, the outlet is communicated with the exhaust of the valve. When the coil is put into tension, the solenoid valve is activated, air circulation occurs between the inlet and outlet of the solenoid valve. The coil is not included in the supply.

The solenoid valve has 3 positions with 2 coils, if a coil is fed the cylinder advances, if both coils are left without tension, the cylinder stops but the air is kept in the circuit, with which the cylinder maintains the pressure (force) and if the other coil is fed, the cylinder is collected.

Provider: Metal Work.

- solenoid valve: 7020022100 SOV 36 SOS DC

characteristics:

  • Operating pressure: 1 ÷10 bar
  • Minimum assist pressure: 2.5 bar
  • Operating temperature: -10 ÷ +60
  • Nominal diameter: 7.5 mm
  • Conductance C Nl/min · bar: 264.26
  • Critical ratio b bar/bar: 0.27
  • Flow rate at 6 bar ΔP 0.5 bar Nl/min: 750
  • Flow rate at 6 bar ΔP 1 bar Nl/min:1100
  • Monostable TRA/TRR at 6 bar ms: 19/45
  • Bistable TRA/TRR at 6 bar ms: 21/21
  • Voltage according to coils: 12; 24 VDC - 24; 110; 220V AC 50/60Hz
  • Voltage tolerances %: -10 ÷ +15

Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the technical sheet by clicking on the "Attachments" tab

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

You might also like

16 other products in the same category:

Customers who bought this product also bought:

Brackets and tensioners with bearings

Square bracket with shaft bearing 45mm UCF209 - ISB

UCF209-ISB
€17.82 (€14.73 tax excl.)
Square casting bracket with UCF209 inserted bearing for 45mm diameter shaft, self-aligning support bracket with ball bearing inserted with prisoners in the inner ring, plate sealing endowed with a lip in nitrile rubber. Bearing with spherical outer rings for self-alignment and to compensate for alignment defects. Reference: UCF2091 Representative image...
OLEOSTATIC GOLD A 27...
Classic series A trapeze straps

OLEOSTATIC GOLD A 27 13x686mm Trapecial Strap - MEGADYNE

97R-A27-GOLD
€10.19 (€8.42 tax excl.)
OLEOSTATIC GOLD V-belt profile type "A" 13x8mm, with an internal development length of Li-686mm,for power transmission in industrial machinery, agricultural machinery and gardening applications. Careful design and manufacturing, which provides low stretching, wear and are lubricant resistant. The OLEOSTATIC GOLD series are the ultimate exponent of the...
Home