Filtering unit with 3/8 pneumatic pressure regulator, composed of 1 element (Filter-regulator) with semi-automatic purge. This device combines in a single unit the functions of filtration, condensation separation and pressure regulator. The pneumatic pressure regulation margin is between 0 and 12 kg/cm2, the degree of filtering is 20 μm.
Among the main characteristics of this filter group, it has a great flow performance compared to its size and reduced weight, satisfying the current demand for miniaturization and performance. Made of technopolymer and nickel-plated brass with excellent resistance to corrosion.
The type of purge is semi-automatic with condensate discharge, independent of pressure and flow.
Note: the pressure gauge is not included in the supply, it must be ordered separately.
Characteristic:
- Manufacturer: Metal Work
- Reference: FR SY1 3/8 20 012 RMSA
- Code: 5613B263
- Thread size: 3/8"
- Group Size: Size 1
- Regulation field: 0 to 12 bar .
- Maximum inlet pressure: 15 bar .
- RMSA: Manual condensate drain and automatic drain when pressure is removed
- Built-in overpressure bleed valve.
- Locking knob (padlock not included).
- Filtration degree: 20μm.
- Cup capacity: 30 cm3
- Flow at 6.3 bar (0.63 MPa, 91 psi) ∆P 0.5 bar (0.05 MPa, 7 psi) : 2200 Nl/min.
- Flow rate at 6.3 bar (0.63 MPa; 91 psi) ∆P 1 bar (0.1 MPa; 14 psi): 3000 Nl/min.
- Thread size for pressure gauge: 1/8" front and rear.
- Wall fixing screws: M4x45.
- Mounting position: Vertical.
- Working temperature: -10 to +50ºC.
- Full discharge step by zeroing inlet pressure and lockable knob included.
- Flow rate of the additional air intakes at 6.3 bar : 500 Nl/min
For other sizes or references: consult.
Material for professional use, install in compliance with the regulations in force at the place of installation.
For more information, you can download the technical sheet by clicking on the "Annexes" tab.
English 
Français
Adajusa SPAIN
Adajusa PORTUGAL
Adajusa ITALY
