Single step roller chain 15.875 50 ANSI 10A-1 ASA 8188 Tsubaki - ADAJUSA
Single step roller chain 15.875 50 ANSI 10A-1 ASA 8188 Tsubaki - ADAJUSA

Single stainless steel roller chain step 15.875 50 ANSI 10ASS-1 ASA 8188 - Tsubaki

€174.16 Tax included

€143.93 tax excl.

Simple roller chain in stainless steel according to American standard ASA DIN 8188, up to 98% performance (*), very light and compact which allows to be installed in very limited spaces.

Reference: CADE-RS ASA-50-SS:TSU

Step: 15.875- 50 ANSI

Roller diameter: 10.16 mm


Price per meter. Sale exclusively by packaging of multiples of 5 meters.

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
 

Roller chain in stainless steel, in accordance with the requirements of the ASA DIN 8188 standard. Made in Japan.

A roller chain is a series of bearings connected by meshes (plates), great versatility and durability in environments with a lot of dust, oil, water, greases, etc ... Roller chains develop a synchronous power transmission, without slippage, and the effectiveness of the transmission does not depend on the transmitted mechanical stress.

They can be used in a wide range of industrial and general applications, motors, compressors, printing presses, conveyors, agriculture....

All the basic components of this chain are made of SUS304 stainless steel (except the presillas, which are made of SUS301).

These chains can be used in special environments, such as underwater and in acydic and alkaline applications. They can also be used in low and high temperatures (-20 °C to +400 °C). The SUS304 is only slightly magnetic, which is the result of the cold setting process.


Features:
  • Manufacturer: Tsubaki
  • Reference: CADE-RS ASA-50-SS:TSU
  • Exclusive sale for packaging of 5 meters of chain.
  • Pitch (P): 15.875 mm
  • Roller diameter (d1): 10.16 mm (max)
  • Internal width (b1): 9.53 mm (min)
  • Shaft diameter (d2): 5.09 mm (max)
  • Junction length (L): 22.60 mm (max)
  • Mesh height (h2): 15.00 mm
  • Shaft width (T): 2.00 mm
  • Minimum breaking load (Q ISO/DIN) 21.8/28.4 kN
  • Average breaking load (Q0): 39.00 kN
  • Approximate weight: 1.04 kg/m

(*) Under correct lubrication conditions.

Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the technical sheet by clicking on the "Attachments" tab




Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

You might also like

1 other product in the same category:

Reviews
Product added to wishlist
Product added to compare.