Blow gun with safety stainless steel tube - Aignep

Blow gun made of nickel-plated brass, with G1/4 female threaded air inlet. Easy-to-use pneumatic tool for air systems, which allows the fluid outlet pressure to be regulated and dosed by operation using the thumb, which makes it essential depending on the application for which it is intended. Very quiet blow gun, with high blowing force and capable of providing a high flow rate.


It has an elongated 90mm long nozzle with an angular shape made of stainless steel that allows the outlet fluid to reach areas that are difficult and expensive to access. It is a nozzle or safety tube that provides efficient and safe blowing for the operator. Nozzle in compliance with OSHA safety standards that govern the use of blow guns, static pressure at lock and sound levels ; meet safety requirements while maintaining a high blowing force, redirect the outlet fluid in case of blockage, always having the fluid an escape route to guarantee the safety of the operator, at the same time reducing the noise produced, providing a safe and efficient blowing.

Compliance with OSHA 1910.242(b) ensures that the dynamic pressure must be less than 30 psi (2 bar) in the event of nozzle blockage and compliance with OSHA 1910.95(b) ensures that the noise level should be less than 90 dBA over a period of use of 8 hours.

Multipurpose gun for compressed air applications in workshops and industries, valid for multiple applications such as cleaning and removing dust, dirt, chips, residue, drying surfaces or parts, etc.

Long-life tool without the need for maintenance, resistant to shocks and wear. It has a series of holes, so that when the air escapes, a protective screen is created that guarantees the protection of the operator, preventing chips or particles from reaching them that could cause damage or possible injuries.

Characteristics:

• Manufacturer: Aignep
• Reference: 304 90
• Series: 300
• Compatible fluids: Air
• Threaded entry: G1/4 Female
• Temperature: -10ºC to +80ºC
• Pressure: 10bar (1MPa)
• Flow rate: 316Nl/min at 6bar / 416Nl/min at 8bar
• Sound intensity: 82dB at 6bar / 85dB at 8bar
• Force on the handle: 23.5N at 6bar
• Blowing force: 2.93.5Certifications:
  • 2003/10/EC: Max. 85dB
  • OSHA 1910.95(b): Max. 90dB at 8hr
  • OSHA 1910.242(b): Max. 30PSI (2.1bar) when locked

Material for professional use, install in compliance with the regulations in force at the installation site.

For more information you can download the technical sheet by clicking on the "Attachments" tab